For Sale by Negotiation

Used Stainless & Carbon Steel Mini Slitting Line

0.3 ~ 2.2mm Thickness x 850mm Width x 8 Ton x 100 MPM  

Built in 2005  

Under Operation  

1)   UNICOILER M/C

a)    TYPE: SINGLE ARM TYPE & SUB ARM

SLIDING & HYD CYLINDER FOR DRUM EXPASION

MOVING & ADJUSTING FOR MACHINE BODY (CENTERING)  & º¤ÅÍ MOTER DRIVING

b) COIL WEIGHT: MAX   8TON  (8,000kg)

c) DRUM SIZE: ¢±400 mm (SUB DRUM : ¢±508 mm)

d) BRAKE: PNEUMATIC (¢±63 x 50ST – CA)

e) WORKING WIDTH: MAX 850mm

f) LINE SPEED: MAX 100M/MIN

g) DRIVING MOTOR: Vector MOTOR 7.5kw

h) DRUM EXPANSION CYLINDER: APPROX ¢±100 x 75ST

i) DRUM MAT¡¯L: STPG

k) FRAME MAT¡¯L: SS41 (H –BEAM ¿Ü)

2) UNCOIL CAR

a) TYPE: 4WHEEL DRIVE

            HYDRAULIC CYLINDER UP – DOWN & IN – OUT TYPE

b) WORKING WEIGHT: MAX  8TON (8,000kg)

3) GUIDE TABLE

a) TYPE: HINGE TYPE

b) TABLE UP-DOWN: HYD CYLINDER

4) PINCH & GUIDE

A) PINCH

a) TYPE: AIR CYLINDER UP & DOWN TYPE

b) ROLL SIZE: ¢±150 x 860L

B) GUIDE

a) TYPE: VERTICAL ROLL

b) ADJUST TYPE     : MANUAL METHOD

c) GUIDE WIDTH       : 50 ~ 860mm

5) SLITER M/C

a) TYPE: UP/DOWN MANUAL HANDLE WITH WORM GEAR TYPE

             Vector MOTOR DRIVE SYSTEM

                       DRIVE FULL CUTTING & FINGER TYPE

b) MAIN SHAFT SIZE:   ¢±110 x 860mm

c) MAIN SHAFT MAT¡¯L: SUJ -2

d) KNIFE SIZE: APPROX ¢±110 x ¢±185 x 5mm

e) KNIFE MET¡¯L: SKD11

f) WORKING THICKNESS: 0.3 ~ 1.6mm

g) WORKING SPEED: MAX 100 M/MIN

h) WORKING DRIVE MOTOR: Vector MOTOR 30kw

6) SCAP WINDER

a) TYPE: DOUBLE DRUM EXTENSION OR SPINDLE TYPE

b) WORKING WEIGHT: MAX 500kg

c) WORKING SPEED: MAX 110 M/MIN

d) WORKING DRIVING MOTOR: Vector MOTOR 3.7kw

7) LOOP TABLE

a) TYPE: Y - TYPE

b) UP & DOWN: HYDRAULIC CYLINDER

8) TENSION PAD & ROLL

A> SEPARATOR PART

a) TYPE: IDLE ROLLER TYPE

b) ROLL SIZE: ¢±60 x 860mm

c) KNIFE SIZE: ¢±60 x ¢±130 x 3mm (APPROX)

B> TENSION PAD

a) TYPE: AIR CYLINDER UP/DOWN TYPE

b) PAD SIZE: 40t x 160w x 950mm

c) PAD MAT¡¯L: º¤Å¬¶óÀÌÆ®

C> PINCH ROLL

a) TYPE: AIR CYLINDER UP/DOWN TYPE

b) ROLL SIZE: ¢±150 x 860L

D> IDLE ROLL

a) TYPE: IDLE ROLL TYPE

b) ROLL SIZE: ¢±300 x 860mm (URETHANE COATING)

9) EXIT TABLE

TABLE UP & DOWN: HYDRAULIC CYLINDER

10) RECOIL M/C

 A> RECOIL M/C PART

a) TYPE: SINGLE ARM & GEAR BOX TYPE, SUB ARM

             SLIDING & HYD¡¯ CYLINDER FOR DRUM EXTENSION

             SAPARATOR & PUSHING TYPE

b) DRUM SIZE: ¢±300mm (SUB DRUM : ¢±400, ¢± 508mm)

c) WORKING WEIGHT: MAX 8TON (8,000kg)

d) WORKING WIDTH: MAX 850mm

e) WORKING SPEED: MAX 100M/MIN

f) DRIVING MOTOR: Vector MOTOR 45KW

g) DRUM EXPANSION CYLINDER: ¢±100 x 50ST¡¯

B> PUSHING PART

a) TYPE: PLATE PUSHING TYPE

b) HYD¡¯ CYLINDER: ¢±80 x 1020ST – TA

C> SEPARATOR

a) TYPE: HINGE ARM UP & DOWN TYPE

b) AIR CYLINDER: ¢±140 x 285ST – CB

c) ROLL TYPE: IDLE ROLL TYPE

d) ROLL SIZE: ¢±60 x 850mm

e) KNIFE SIZE: ¢±60 x ¢±130 x 3mm

11) RECOIL CAR

a) TYPE: 4WHEEL DRIVE

             HYDRAULIC CYLINDER UP – DOWN & IN – OUT TYPE

b) WORKING WEIGHT: MAX 8TON (8.000kg)

12) ELECTRICAL SYSTEM

a) MAIN CONTROL PANEL: 1 SET

b) SUB OPERATING PANEL: 2 SET

c) ELECTRIC POWER SOUCE: 380V x 60HZ

13) MOTORS

FOR UNCOILER MACHINE: Vector  MOTOR 7.5KW    (1 SET)

FOR SLITTER MACHINE: Vector MOTOR 30kw      (1 SET)

FOR SCRAAP WINDER: Vector MOTOR 3.7kw      (1 SET)

FOR PINCH ROLL: GEARED MOTOR 1.5kw   (1 SET)

FOR RECOIL MACHINE: Vector MOTOR 37kw      ( 1 SET)

FOR HYD. UNIT: A.C MOTOR 5.5kw       (1 SET)

              GRAND TOTAL: APPROX   80.7kw